| 280 | 4 | 40 |
| 下载次数 | 被引频次 | 阅读次数 |
研究在高压条件下以磷酸一铵和缩合剂三聚氰胺为原料生产聚磷酸铵(APP)的合成工艺条件,制备了平均聚合度为580的聚磷酸铵(APP-Ⅱ)。结果表明,n(三聚氰胺)/n(磷酸一铵)=1、反应温度280℃、反应时间90 min、反应压力100 MPa、热处理温度250℃、热处理时间120 min、湿氨气反应气氛为制备结晶Ⅱ型高聚合度的聚磷酸铵阻燃剂的最佳工艺条件。合成的产品通过IR、XRD分析与商业APP-Ⅱ进行了对比,两者在结构与晶型上一致。
Abstract：The synthesis conditions of APP-Ⅱwith monoammonium phosphate and condensing agent melamine as the raw materials at high pressure is studied,the APP-Ⅱproduct with the average degree of polymerization of 580 is produced.The results show that the optimum polymerization conditions are as follows:the molar ratio of ammonium dihydrogen phosphate to melamine of 1,reaction temperature of 280 ℃,reaction time of 90 min,the reaction pressure of 100 MPa,the heat treatment temperature of 250 ℃,heat treatment time of 120 min,with the wet ammonia reaction atmosphere.The FT-IR and XRD spectra of synthesis product are compared with those of commercial APP-II.
[1]Gousheng Liu,Wenyan Chen.A Novel Process to Prepare Ammonium Polyphosphate with Crystalline Form II and its Comparison with Melamine Polyphosphate[J].Ind Eng Chem Res,2010,49:12148-12155.
[2]Camino G,Costa L,Trossarelli L.Study of the mechanism of intumescence in fire retardantpolymers(Part I):Thermal degradation of ammonium polyphosphate-pentaerythritolmixtures[J].Polymer Degradation and Stability,1984,6(4):243-252.
[3]Shang Han Wu,Feng Yi Wang,Chen Chi.Mechanical,thermal and morphological properties of glass fiber and carbon fiber reinforced polyamide-6and polyamide-6/clay nanocomposites[J].Materials Letters,2001,49(6):327-333.
[4]Francois Dabrowski,Serge Bourbigot.Kinetic modelling of the thermal degradation of polyamide-6nanocomposite[J].European Polymer Journal,2000,36(2):273-284.
[5]Thomas Staffel,Renate Adrian.Process for the preparation of ammonium polyphosphate:US,5277887[P].1992-01-11.
[6]Cipolli.Ammonium polyphosphate microencapsulated with aminoplastic resins:US,5576391[P].1996-11-19.
[7]Chakrbarti.Surface-moldified ammonium polyphosphate:US,5109037[P].1992-04-28.
[8]Shen C Y.Preparation and Characterization of Crystalline Long-Chain Ammonium polyphosphates[J].J Am Chem Soc,1969,91(2):62-67.
[9]王清才,杨荣杰.关于工业聚磷酸铵国家行业标准的讨论[J].无机盐工业,2006,38(2):75-77.
[10]胡彩霞,张文俊,薛建伟,等.新型聚丙烯β晶型成核剂的评价[J].太原理工大学学报,2006,37(6):618-620.
[11]谢吉星,焦运红.聚磷酸铵的微胶囊化与阻燃应用[J].阻燃材料与技术,2004(1):1-2.
[12]耿妍,陶杰.聚磷酸铵微胶囊化的工艺研究[J].玻璃钢/复合材料,2006(3):39-41.
基本信息:
DOI：
中图分类号:TQ314.248
引用信息:
[1]何宾宾,方世祥,冯碧元等.结晶Ⅱ型高聚合度聚磷酸铵的合成及表征[J].磷肥与复肥,2012,27(06):20-22.
基金信息: